Laney LA65D - Manual (Page 12)

POWER INLET SOCKET:
POWER FUSE:
MAIN POWER SWITCH:
REAR PANEL DETAILS: Displays the model number, power requirements and serial number of the unit.
HEADPHONES: Socket for connecting a pair of quality headphones. This also switches from the main amplifier to the
headphones own seperate amplifier. The internal loudspeaker is automatically turned off.
Connect to your power source. Make sure the specified voltage is correct for your
country!
This is the main safety fuse for the unit. The fuse protects the AC power to the amplifier. USE ONLY
THE CORRECT SIZE AND RATING OF FUSE AS SPECIFIED ON THE PANEL. If a fuse blows or fails and a replacement
of the same size and rating is installed and it in turn blows, the amplifier has suffered a malfunction internally and needs
immediate service from a qualified technician. DO NOT TRY USING A FUSE OF HIGHER RATING. Using a fuse that is
too large in current rating may cause serious, irreparable damage to the amplifier and presents a serious fire hazard. The
mains fuse ratings are detailed in the specs section on page 7 of this manual.
Main power switch for the unit.
Page
12 / 20
5
1
2
3
4
8 1 2 3 5 6 11 7 9 10 4
REAR PANEL CONTROLS
LA65D
FOOTSWITCH
FOOTSWITCH (FS2)
CHORUS - TIP
REVERB- RING
IN
BYPASS
0
dBu
D.I. OUT
OUT
EFFECTS LOOP
(INSERT)
FX SEND/
LINE OUT
FX RETURN
-10dBu
GND LINK PHONES
0
SERIAL NO:
DESIGNED AND ENGINEERED IN THE UK
N15039
Power To The Music
WWW.LANEY.CO.UK
L Z B 1 2 3 4
MAXIMUM POWER CONSUMPTION
100 WATTS 50/60Hz
SUPPLY VOLTAGE & FUSE RATING: