Laney AH150 - Manual (Page 6)

NOTE
This manual has been written for easy access of information. The
front and rear panels are graphically illustrated, with each control
and feature numbered. For a description of the function of each
control feature, simply check the number with the explanations
adjacent to each panel.
Your Laney amplifier has undergone a thorough two stage, pre-
delivery inspection, involving actual play testing.
When you first receive your Laney amplifier, follow these simple
procedures:
(i) Ensure that the amplifier is the correct voltage for the
country it is to be used in.
(ii) Connect your equipment with a high quality shielded cable.
You have probably spent considerable money on your amplifier
and equipment - don’t use poor quality cable, it won’t do your
gear justice.
Please retain your original carton and packaging so in the unlikely
event that some time in the future your amplifier should require
servicing you will be able to return it to your dealer securely
packed.
Care of your Laney amplifier will prolong it’s life.....and yours!
After unpacking your amplifier check that it is factory fitted with a
three pin ‘grounded’ (or earthed) plug. Before plugging into the
power supply ensure you are connecting to a grounded earth outlet.
If you should wish to change the factory fitted plug yourself, ensure
that the wiring convention applicable to the country where the
amplifier is to be used is strictly conformed to. As an example in
the United Kingdom the cable colour code for connections are as
follows.