Lanner FW-8750 - Manual (Page 30)

FW-8750
30
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off] Leaves the computer in the power off state.
[Power On]
Leaves the computer in the power on state.
Hardware Health Configuration: Press <Enter> to enter the sub-menu and the
following screen appears:
H/W Health Function : Enable/Disable Hardware Health Monitoring Device.
CPU FAN Mode Settings : These items allows you to select CPU fan mode
Configuration options:[ Automatic mode][Full On mode][PWM Manually mode]
Fan 1 Start PWM: Default set 63. The temperauter in low speed rpm of the Fan
System FAN Mode Settings : These items allows you to select CPU fan mode
Configuration options:[ Automatic mode][Full On mode][PWM Manually mode]
Fan 2 Start PWM: Default set 63. The temperauter in low speed rpm of the Fan
Temperature 1 Limit of OFF : Default set 0˚С. The FAN turn off in which
temperature