EverFocus DVR EDR810M User Manual
Page 24
2
2
.
.
1
1
B
B
a
a
s
s
i
i
c
c
W
W
i
i
r
r
i
i
n
n
g
g
I
I
n
n
s
s
t
t
r
r
u
u
c
c
t
t
i
i
o
o
n
n
s
s
Please refer to diagram 2.1 to assist you with this portion of the installation.
1. Power
Connect the power source or adapter into the power socket.
2. Cameras
Connect each cameras video output to the video inputs on the digital video recorder.
Note: At least one camera must be connected before the system is running for the auto detection of
video standard to take effect.
3. Audio Input
The camera audio output or Microphone is connected to the audio input terminal at the rear panel.
4. Audio Output
Connect the speaker or other audio listening devices to the audio output terminal on the back of the
digital video recorder.
5. Ethernet
The digital video recorder may be viewed from a PC via the LAN connector using a RJ45 Ethernet
cable.
6. RS485
The digital video recorder can be controlled from an EKB500 keyboard via RS485.
Note: This can be done using a RJ45-to-serial cable.
7. Main Monitor
Connect a monitor to the main monitor output connector. The main monitor displays live or
recorded cameras in any available format.
Note: The main monitor must be connected in order to make configuration changes, enter the main
menu, or do a playback at the machine.