EverFocus DVR EDR810M - Manual (Page 42)

4. WATER MARK:
ON: Recording is overlaid by a visible watermark (“W”).
OFF: No watermark.
5. RESOLUTION: The resolutions for NTSC are 720x480, 720x240 and 360x240; the default
value is 720x240. The resolutions for PAL are 720x576, 720x288 and 360x288; the default value
is 720x288.
NOTE: The resolution determines the maximum record speed supported by the DVR.
NTSC
720x480 = 30 IPS
(this IPS value is divided by the amount of cameras installed)
720x240 = 60 IPS (this IPS value is divided by the amount of cameras installed)
360x240 = 120 IPS (this IPS value is divided by the amount of cameras installed)
6. RECORD MODE:
REWRITE: Continue recording. Disk will begin overwriting if it is full.
STOP: Stop recording when disk is full.
7. AUTOWRITE WITHIN: You can set DVR to automatically overwrite after the selected
number of days. If you do not wish to use this function, simply select “0”.
8. PRE-ALARM RECORDING
Select “YES” to enable pre-alarm recording function. Select “NO” to disable pre-alarm recording
function.
9. RELAY OUT
By selecting “1”, user can easily identify whether DVR is recording or not if relay output is
connected to a signaling device. Select “NONE” if you do not wish to identify recording status.