Bang & Olufsen BeoVision Avant - User Guide - Manual (Page 16)

16
>> Connections
Ethernet
For connection to the Internet. For software
updates, access to WebMedia, NetRadio and
PUC downloads.
Make sure the cable connection between the
product and the router does not exit the
building to avoid contact with high voltage.
It is strongly recommended that you set your
television to update system software
automatically,
see page 71 .
STAND
For connection of a motorised stand or wall
bracket.
See page 22 for calibration of floor
stand or wall bracket .
AERIAL
Aerial input socket for an external aerial/
cable TV network or for an analogue signal.
SATELLITE (1–2)
Aerial input sockets for a digital satellite
signal.
COMMON INTERFACE (2 x PCMCIA)
For insertion of a CA module and card for
access to coded digital channels. For more
information about compatible card and
module combinations, contact your Bang &
Olufsen retailer.
Easy access socket panel
HDMI IN (6)
HDMI IN connection of additional equip ment.
You can also connect a camera or a game
console.
MIC
For connection of a calibration microphone,
to be able to calibrate connected speakers
automatically.
USB ( )
For connection of a USB device to browse
digital photos, video or music files via your
media browser (HomeMedia). If you connect
a USB HDD or SSD, you can use it to record
from the built-in tuners.
6
MIC
Easily access the HDMI IN, microphone and
USB sockets.