Bang & Olufsen BeoVision Avant - User Guide - Manual (Page 51)

51
You can save up to three snapshots which
can be activated by three dedicated remote
control buttons. The television must be
switched on and a source must be selected.
To save a snapshot …
Press and hold one of the
MyButtons to save the current
viewing experience
If you save a snapshot with a button with
which a snapshot has already been saved,
the existing snapshot will be replaced by the
new snapshot.
Use a desired snapshot when you watch
television.
To use a snapshot …
Press the button dedicated for
the desired snapshot
When you restore a saved snapshot, the
settings are temporary and will be in effect
until you adjust the settings, select another
source, or switch the television to standby.
If the item to play as saved in a snapshot is no
longer available, the snapshot will still be
restored, but the item played will follow
normal source behaviour for the selected
source. For example, if a channel saved in the
restored snapshot is no longer available, the
last played channel will be played instead
when the television source is selected.
If you try to use a snapshot with a button
where no snapshot has been saved, the
PERSONALISATION feature is opened in the
NICE TO KNOW menu.
You can save a “snapshot” of a
current viewing experience and
thereby personalise that
experience to be able to restore
it quickly with just one touch of a
button. A snapshot includes the
stand position, the selected
source and the selected settings
for speaker group, sound and
picture adjustment, and sound
and picture mode. For internal
sources, which could be a built-in
tuner, the playing item, such as
channel, may also be saved.
Save a snapshot
Personalise the TV experience
Use a snapshot