Bang & Olufsen BeoVision 8-26/32 - Manual (Page 28)

28
If you connect additional video
equipment to your television, you
must register the equipment in the
CONNECTIONS menu.
When the system is first set up, the
CONNECTIONS menu appears
automatically on the screen, so you
can register any equipment you may
have connected to your televison. If
you connect equipment at a later
date, on a permanent basis, then you
must register this equipment in the
CONNECTIONS menu.
For information about where and
how to connect extra equipment,
refer to the previous pages and the
chapter ‘Socket panel’ on page 2.
Register additional video equipment
What is connected?
Registering the equipment connected to the
television enables you to activate it with the
Beo4 remote control.
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu.
> Press to highlight CONNECTIONS.
> Press GO to call up the CONNECTIONS menu.
> Press or to step between the different
sockets: AV1, AV2, AV and AV4.
> Press GO to be able to register a connected
product to the highlighted socket.
> Press or to move between the different
settings.
> Press or to register what you have
connected to the highlighted socket.
> Press GO to store the settings and be able to
select another AV socket.
> When you have completed your settings, press
STOP to back up through previous menus or
press EXIT to exit all menus directly.
AV1
select GO
SOURCE V. MEM
IR SOCKET NONE
HDMI NO