Epson 900N User Manual
Page 103
96
If your printout is faint or has gaps in the image . . .
■
Make sure the print head nozzles are not clogged. To clean the print head, see
page 77.
■
Make sure your paper isn’t damaged, old, dirty, or loaded face down. If it is,
reload a new stack of paper with the printable side up. The printable surface is
usually whiter or shinier.
If your printout contains incorrect or missing colors . . .
■
Make sure the Ink setting is set to
Color
for color images.
■
Make sure the print head nozzles are not clogged. To clean the print head, see
page 77.
■
Make sure the ink cartridges aren’t low on ink or too old. If either ink out light is
flashing, replace the ink cartridge; see page 80. If your ink cartridge is more than
six months old, you may need to replace it; see page 83.
■
Try using Automatic mode. See page 62 (Windows) or page 65 (Macintosh) for
instructions.
■
Your printed colors can never exactly match your on-screen colors. However, you
can use a color management system to get as close as possible. For information on
your printer software’s color matching options, see your electronic EPSON Stylus
COLOR 900N Manual.
trouble.fm Page 96 Friday, February 19, 1999 4:03 PM