Creating jpeg copies of raw pictures – FujiFilm X100 User Manual
Page 84
68
Creating JPEG Copies of RAW Pictures
Creating JPEG Copies of RAW Pictures
RAW pictures store information on camera settings separately from the data captured by the camera
image sensor. Using the
j RAW CONVERSION option in the playback menu, you can create JPEG
copies of RAW pictures using diff erent options for the settings listed below. The original image data are
unaff ected, allowing a single RAW image to be processed in a multitude of diff erent ways.
1
Press MENU/OK during playback to display the
playback menu, then press the command dial
up or down to highlight
j RAW CONVER-
SION and press MENU/OK to display the set-
tings listed in the table at right.
2
Press the command dial up
or down to highlight a set-
ting and press the dial right
to select. Press the dial up
or down to highlight the
desired option and press MENU/OK to select
and return to the settings list. Repeat this step
to adjust additional settings.
3
Press the RAW button to
preview the JPEG copy.
Press MENU/OK to save the
copy or press DISP/BACK to
return to Step 2.
Setting
Setting
Description
Description
REFLECT
SHOOTING COND.
Create a JPEG copy using the settings in ef-
fect at the time the photo was taken.
PUSH/PULL
PROCESSING
Adjust exposure by –1 EV to +3 EV in incre-
ments of 1
/
3 EV (
P
30).
DYNAMIC RANGE
Enhance details in highlights for natural con-
trast (
P
70).
FILM SIMULATION
Simulate the eff ects of diff erent types of fi lm
(
P
54).
WHITE BALANCE
Adjust white balance (
P
35).
WB SHIFT
Fine-tune white balance (
P
70).
COLOR
Adjust color density (
P
70).
SHARPNESS
Sharpen or soften outlines (
P
71).
NOISE REDUCTION Process the copy to reduce mottling (
P
71).
HIGHLIGHT TONE Adjust highlights (
P
71).
SHADOW TONE
Adjust shadows (
P
71).
COLOR SPACE
Choose the color space used for color repro-
duction (
P
86).
FILM SIMULATION
WHITE BALANCE
REFLECT SHOOTING COND.
WB SHIFT
PUSH/PULL PROCESSING
DYNAMIC RANGE
RAW CONVERSION
CREATE
CANCEL
SET
CANCEL