FujiFilm X100 - Manual (Page 88)

72
Using the Menus: Shooting Mode
u u SELECT CUSTOM SETTING SELECT CUSTOM SETTING
Recall settings saved with K EDIT/SAVE CUSTOM SETTING.
K K EDIT/SAVE CUSTOM SETTING EDIT/SAVE CUSTOM SETTING
Save settings ( P 55).
v v DISP. CUSTOM SETTING DISP. CUSTOM SETTING
Choose the items displayed in the optical viewfi nder or in the electronic viewfi nder and LCD monitor ( P 20). The following items
can be displayed: framing grid (you can also select the grid type as described on page 86), virtual horizon, autofocus distance (fo-
cus distance is always displayed in manual focus mode), histogram, exposure (shutter speed, aperture, and sensitivity), exposure
compensation/exposure indicator, metering, fl ash mode, white balance, fi lm simulation, dynamic range, number of exposures
remaining, image size and quality, and battery level. See pages 6 – 7 for the locations of these items in the displays.
1 Highlight OVF or EVF/LCD and press MENU/OK.
2 Press the command dial up or down to highlight items and press MENU/OK to select or deselect. Press DISP/BACK to exit when
settings are complete.
Virtual Horizon
Virtual Horizon
Selecting Selecting ELECTRONIC LEVEL ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines over- displays a virtual horizon. The camera is level when the two lines over-
lap. lap.
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
P