Parkside PET 25 A1 - Manual (Page 34)

35 GB/MT
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Your statutory rights are not restricted in any way
by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
GB
DES UK LTD
Tel.:
0871 5000 700 (£ 0.10 / minute)
e-mail: [email protected]
Q Disposal
The packaging is wholly composed of
environmentally-friendly materials that
can be disposed of at a local recycling
centre.
Do not dispose of electrical
power tools with the household
rubbish!
In accordance with European Directive 2002 / 96 / EC
(covering waste electrical and electronic equipment)
and its transposition into national legislation, worn
out electrical power tools must be collected separately
and taken for environmentally compatible recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
Q
Declaration of conformity /
Manufacturer
We, Kompernaß GmbH, the person responsible for
documents: Mr Felix Becker, Burgstr. 21, D-44867
Bochum, Germany, hereby declare that this product
complies with the following standards, normative
documents and EU directives:
Machinery Directive
(2006 / 42 / Ec)
EU Low Voltage Directive
(2006 / 95 / Ec)
Electromagnetic compatibility
(2004 / 108 / Ec)
Applicable harmonized standards
EN 50144-1/A2:2003, EN 50144-2-16:2003
EN 55014-2/A1:2001, EN 55014-1:2006
IEC 60745-1:1982, IEC 60745-2-16:1993
EN 61000-3-2:2006, EN 61000-3-11:2000
Type / Device description:
Electric nailer / stapler PET 25 A1
Date of manufacture (DOM): 01 - 2011
Serial number: IAn 61798
Bochum, 31.01.2011
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifica-
tions in the course of further development.
Warranty / Disposal / Declaration of Conformity / Manufacturer
61798_par_Elektrotacker_content_LB5.indd 35 10.01.11 16:19