Eureka Series 440 - Manual (Page 6)

6
H
F
G
I
B
A
C
D
K
E
J
L
B
A
C
D
J
B
C
ENGLISH
PARTS LIST
A Body
B Floor nozzle
C Upper handle
D Lower handle
E Power switch
F Dust cup latch
G Dust cup
H Filter assembly
I Stair cleaning hand grip
J Handle button
K Electrical cord
L Quick cord release
HOW TO ASSEMBLE
CAUTION: Assemble the cleaner completely before plugging
into an electrical outlet. Make sure switch is in the
Off position.
Attach Floor Nozzle
(Fig. 1)
Step 1: Align the lock button on the floor nozzle neck B with the
hole in the receiving tube on the main body A .
Step 2: Slide the floor nozzle B into the main body A until it
clicks into place.
Step 3: Push the lock button in and pull on the floor nozzle B to
remove it from the main body A .
Attach Handle
(Fig. 1)
Step 1: Align flat side of upper handle C with flat side of lower
handle D and press together.
Step 2: Line the handle assembly C and D up with the hole
in the top of the body A . Flat side of handle and loop
should face forward.
Step 3: Push handle assembly C and D down into body while
pressing the handle button J on back of the body A .
Handle will click into place.
Step 4: There are two handle positions available: Handle all the
way up and handle all the way down. Handle button J
needs to be depressed to raise and lower the handle
assembly
C and D .
FIG. 1