Parkside PBH 1100 A1 - Manual (Page 11)

3. Layout (Fig. 1)
1. Dust guard
2. Locking sleeve
3. Additional handle
4. Locking screw for depth stop
5. Selector switch for drill/hammer drill/chisel
6. Handle
7. Clockwise/counter-clockwise
switch
8. Locking button
9. Speed controller
10. ON/OFF switch
11. Operating status indicator
12. Indicator for carbon brush wear
13. Depth stop
14.
Additional quick-change drill chuck
15. Dust absorption device
4. Items supplied
Take all the parts out of the packaging.
Check that nothing is missing.
PBH 1100 A1 SDS-Plus-Hammer Drill
Additional handle
Depth stop
Drill bits for stone (6, 8, 10 mm)
Pointed chisel / flat chisel
Additional quick-change drill chuck
Dust absorption device
Operating instructions
5. Proper use
The tool is designed for drilling with hammer
action in concrete, rock and brick, as well as
for chiseling work, always using the respective
correct drill or chisel bit.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator
and not the manufacturer will be liable for any
damage or injuries of any kind caused as a
result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
6. Technical data
Mains voltage: 230-240 V ~ 50 Hz
Power input: 1050 W
Idling speed: 0-1100 rpm
Blow rate: 0-5100 rpm
Drilling capacity in
concrete/stone (max.): Ø 26 mm
Protection class: II /
Ɓ
Weight: 3.6 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level 91.8 dB(A)
K
pA
uncertainty 3 dB
L
WA
sound power level 102.8 dB(A)
K
WA
uncertainty 3 dB
11
GB/IE/
CY
Anleitung_4258378_GB_IE_CY:_ 14.10.2011 12:46 Uhr Seite 11