EVGA nForce 122-YW-E173 - Manual (Page 20)

EVGA 12
Power Connections
To support 2-way SLI, this motherboard has the following specific minimum power supply
requirements:
‰ An SLI-Certified power supply.
‰ 6-pin and/or 8-pin PCI-E power connectors configured in either of the following
configurations (see Figure 3):
¾ Two 6-pin (3x2) and two 8-pin (4x2) PCI-E power connectors
¾ Four 6-pin (3x2) PCI-E power connectors
¾ Two 6-pin (3x2) PCI-E power connectors
8-pin (4x2) PCI-E Connector 6-pin (3x2) PCI-E connector
Figure 3. Power Supply Connectors
Make sure you have enough power to cover all the expansion cards you will be installing. To
determine what power requirements are for your specific configuration or a certified power
supply vendor, refer to
www.slizone.com
.