Eureka 1040 Series - Manual (Page 6)

Suction Inlet. Insert the end of the hose in the inlet to
use vacuum function.
On/Off Switch. International symbol I means On,
International symbol O means Off.
Electrical Socket. The large end of the electrical cord
plugs into this socket, the other end into a wall outlet.
Blower Port. Insert the end of the hose into the blower
port to use the blower function.
Carrying Handle. Use this handle to carry unit
from one place to another. The handle can also
be used for electrical cord storage.
Quick Cord Release Button. Press in on
button for quick access to electrical cord.
Electrical Cord. The electrical cord can be
stored wrapped around the handle or inside the
tool box compartment.
DANGER: Electrical cords can be
hazardous. Please read safety instructions
on electrical cord.
Tool Box Lid Latchs (2). Lift up on latch to
release the tool box lid.
QUICK REFERENCE
1
2
3
4
6
7
8
1
2
3
4
4
5
5
6
7
8
Helpful Information:
Listen to your cleaner. If you notice a change in the sound of the motor or a change in performance, it could
simply indicate a common usage or maintenance issue. Such as, possible blockage in hose , dirty filter or
full dust bag . These are all easy to fix and the instructions are included in this owner’s guide. Becoming
familiar with the information in this guide will help you to get the best possible performance from your new
cleaner for many years to come.
6