Epson ELP-3300 - Manual (Page 32)

13
Connecting to an Audio Source
The projector has two inputs for audio: one for your computer and one for your
video source. Each input has two audio jacks: the L jack controls the left speaker
and the R jack controls the right speaker. If you’re connecting to an audio
source that has only a single plug, connect it to the L Audio In jack.
To receive audio from the computer or video source, use the video/audio cable
supplied with the projector. To receive audio from both the computer and video
source, you need to obtain an additional cable from your computer dealer.
1. Connect one end of the audio cable to the appropriate (computer or video
source) Audio In jacks on the projector. Insert the white plug in the L Audio
In jack and the red plug in the R Audio In jack. (You don’t use the yellow
plug unless you’re supplying composite video.)
2. Connect the other end of the cable to the audio source. Insert the white plug
in the L Audio Out jack, and the red plug in the R Audio Out jack.
red
white
red
white
video/audio cable
2
1
S-Video Audio In Audio In Video In
L R L R
Video
Connecting to an Audio Source