Epson ELP-3300 - Manual (Page 85)

66 6 • Troubleshooting
Problems with the Projector
If you are having problems with the projector, first check the status lights at the
top of the projector. These lights monitor the operation of the projector.
lamp light
temperature light power light
Status light Color Status
Temperature Flashing orange The projector is hot.
Orange The projector is too hot. The lamp turns off.
Lamp Flashing green The lamp is warming up.
Green The lamp is on.
Flashing orange The lamp is cooling down.
Flashing green The lamp has been used for 700 hours and
and orange should be replaced.
Flashing red The lamp is not working.
Power Orange The projector is in standby mode.
Green The projector and lamp are on.
Flashing green The projector is receiving a signal from the
remote control.
Flashing red There is a problem with the projector.