How to assemble and use – Eureka 6996 User Manual

Page 7

Advertising
background image

9

9

9

7

How to Assemble and Use

(continued)

5. Insert hose coupling into front of canister.

6. Pull cord out until fully extended, and push plug

into outlet. To rewind, step on Cordaway cord reel
button, hold and guide plug while it rewinds.

7. Step on motorized nozzle to release handle;

pull back to comfortable work position.

8. Push On/Off canister switch.

(A thermostat automatically shuts off the motor if
it overheats, see Thermal Cut Off.)

9

9. Bare floor or carpet cleaning selection on

remote control, only.

Motorized

Nozzle

On/Off Canister Switch

7

9

5

6

8

10

10. Red light indicates dirt, dust, etc. is still being

removed from the area being cleaned. The green
light indicates the area is clean and to move on to
the next area.

NOTE: Dirt sensor works most effectively when suction

control regulator on canister and vacuum
control on handle are both on HIGH.

HINT: New carpeting has loose carpet fibers which

will activate the red light sensor beam.

Red
Light

Green
Light

Only with Model 6996

9 V

Must install
9V Battery

Advertising
This manual is related to the following products: