Curtis NS-B1111 - Manual (Page 9)

8
NS-B1111 CD boombox
www.insignia-products.com
To preset as many as 20 FM and AM stations:
1 Press the POWER button to turn your CD boombox on.
2 Press the FUNCTION button to select the tuner mode.
3 Press the STOP/BAND button to select AM or FM.
4 Press REW SKIP/TUNER-DN or FEW SKIP/TUNER-UP button to
select the desired AM or FM station.
5 Press the MEMORY/CLOCK SET button. P-01 flashes on the
display.
6 Press the MEMORY/CLOCK SET button again to set the preset.
7 Repeat steps 2 through 4 to set more presets. You can preset as
many as 20 AM or FM stations.
8 Press M-UP or M-DN to select your preset station.
Troubleshooting
Symptom Possible Cause Solution
CD Player:
CD player won’t play. CD is not inserted or
is inserted incorrectly. Insert CD with label
facing up.
CD skips while
playing. Disc is dirty or
scratched. Wipe CD with cloth or
use another CD.
Radio:
Noise or sound
distorted on radio
broadcasts. • Station not
tuned correctly
for AM or FM.
• FM: Antenna
wire is not
extended.
• AM: Your CD
boombox is not
positioned
correctly.
• Retune the AM
or FM broadcast
station.
• Extend FM
antenna wire.
• Rotate your CD
boombox until
best reception is
obtained.
AM or FM, no sound. Volume is too low. Increase volume.
General:
No sound. • Power cord
disconnected.
• No batteries,
dead batteries
or batteries not
installed
correctly.
• Power is off.
• Connect power
cord.
• Make sure
batteries are
fresh and
installed
correctly.
• Use the
POWER button
to turn on your
CD boombox.
NS-B1111.fm Page 8 Thursday, February 16, 2006 4:06 PM