Curtis SKAR122BT - Manual (Page 6)

5
CD & CD+G
CD vs. CD+G
CD+Gs, or CD+Graphics, are CDs that are specially formatted for use with karaoke machines. In
addition to the audio tracks, they contain graphics and text for lyrics that will appear on the screen
while the CD is playing. Switching the unit to CD+G mode will activate the screen and display lyrics
from the loaded CD+G. You must set the source to match the type of disc you wish to play. CD mode
should only be used to play CDs. Like wise, CD+G mode should only be used to play CD+Gs.
Loading and Playing a CD
Note: This unit is not compatible with MP3 CDs.
1. Open the CD Door.
2. Load a CD or CD-R/RW disc into the karaoke machine, label side facing up.
3. Close the CD door.
4. Set the Source Switch on the front of the unit to CD mode.
5. Press the Play/Pause button to begin playing the loaded CD.
Loading and Playing a CD+G
1. Open the CD Door.
2. Load a CD+G disc into the karaoke machine, label side facing up.
3. Close the CD door.
4. Set the Source Switch on the front of the unit to CD+G mode.
5. Plug a microphone (one included) into the Mic 1 or Mic 2 input.
6. Press the Play/Pause button to begin playing the loaded CD+G.
Programming a Loaded CD or CD+G
The procedure for programming either type of disc is the same..
1. Press the Stop button to stop a loaded disc.
2. Press the Program button.
3. Press the Skip/Search buttons to select a track from the loaded disc.
4. Press the Program button to add the selected tracks to the program.
5. Repeat steps 4 and 5 to program up to 20 tracks to play in a specified order.
6. Press the Stop button to cancel a program.
Balance
Use the Balance Control Feature to switch between the pre-recorded singer’s voice and the music,
when using a Multiplex Karaoke Disc.
Echo
Use the Echo Control Feature to enhance your voice for a concert hall effect.