Auriol VWS 2010 - Manual (Page 76)

Vibrating Alarm Clock Auriol VWS2010
English - 75
Getting Started
Connecting the Power Adapter
In order to completely disconnect the
device from the mains, the power adapter
must be pulled out from the wall outlet.
You may optionally power the device by
using conventional batteries. However, do
not use both means of power supply at the
same time. Remove batteries before
connecting the power adapter.
š Plug the connector cable of the power adapter
into the receptacle on the device.
š Plug the power adapter into an easily
accessible wall outlet.
If the device has been separated from the
mains, when it is next powered on it must
be set once again.
Inserting the Batteries
You can operate the device with batteries. To do so
use four AA-sized batteries, 1.5 V (not included in
package contents).