EVGA 121-BL-E756 - Manual (Page 40)

Configuring the BIOS
41
Halt On
All Errors
..... [ ]
No Errors ..... [ ]
All , But Keyboard ..... [ ]

:Move ENTER:Accept ESC:Abort
Base Memory 640K
Extended Memory 1047552K
Total Memory 1048576K
Halt On
Halt On determines whether or not the computer stops if an error is detected
during power on. Use the Page Up and Page Down keys to scroll through the
options or press Enter to display the Halt On sub-menu. Use the  arrow keys
to position the selector in the option you choose. Press Enter to accept the
changes and return to the Standard CMOS Features menu.
‰ All Errors
Whenever the BIOS detects a nonfatal error,
the system stops and prompts you.
‰ No Errors
S ystem boot does not stop for any detected
errors.
‰ All, But Keyboard
System boot does not stop for keyboard
errors, but does stop for all other errors.
Memory
These settings are display-only values that are determined by the BIOS POST
(Power-On Self Test).
‰ Base Memory
BIOS POST determines the
amount of base (or conventional) memory installed in the system.
‰ Extended Memory
BIOS determines how much extended memory is present during the POST.
‰ Total Memory
This value represents the total memory of the system.
Halt On [All , But Keyboard]
Press ENTER to display sub-menu