EVGA 121-BL-E756 - Manual (Page 52)

Configuring the BIOS
53
Reset Configuration
This function on the PnP/PCI Configuration menu allows you to enable or
disable the resetting of Extended System Configuration Data (ESCD) when you
exit Setup. Set this to [Enabled] if you have installed a new add-on and the
system reconfiguration has caused a serious conflict that prevents the OS from
booting. The default setting is [Disabled].
Resources Controlled By
This function on the PnP/PCI Configuration menu allows you to define if the
BIOS can automatically configure all the boot and plug-and-play compatible
devices or if you can manually select IRQ, DMA, and memory base address
fields. Select
[Auto(ESCD)] if you want the BIOS to automatically populate
these fields. If you select [Manual] so you can assign the resources, IRQ
Resources is enabled for input.
IRQ Resources
To enable this field for input, set Resources Controlled By to
[Manual] . With this field enabled, press Enter to see options.
Resources Controlled By [ Manual )]
IRQ Resources [Press Enter]
Resources Controlled By [ Auto(ESCD) ]
x IRQ Resources Press Enter