Safety information / use, Safety instructions for batteries, Using of the salt and pepper mill – Ernesto Z29535 User Manual

Page 5

Advertising
background image

5

GB

Safety Information / Use

J

FOOD SAFE! This product does not
affect the taste and aroma properties
of foodstuffs.

J

The bulb

9

is not exchangeable.

Safety Instructions

for Batteries

J

Remove the batteries from the device if they are

not going to be used for a prolonged period.

J

CAUTION! DANGER OF EX-
PLOSION!
The batteries must never
be recharged!

J

When inserting the batteries, ensure the correct

polarity! This is shown in the battery compart-
ments.

J

If necessary, clean the batteries and device

contacts before inserting the batteries.

J

Remove spent batteries immediately from the

device. There is an increased danger of leaks!

J

Batteries must not be disposed of in the normal

domestic waste!

J

Every consumer is legally obliged to dispose of

batteries in the proper manner!

J

Keep batteries away from children; do not

throw them in the fire, short-circuit them or take
them apart.

J

If the above instructions are not complied with,

the batteries may discharge themselves beyond
their end voltage. There is then a danger of
leaking. If the batteries have leaked inside your
device, you should remove them immediately in
order to prevent damage to the device!

J

Avoid contact with the skin, eyes and mucous

membranes. Any parts of the body coming into
contact with battery acid should be rinsed off
with copious amounts of water and / or a doc-
tor contacted if necessary!

Q

Use

Q

Insert Batteries / Filling of the

salt and pepper mill

Indication: The salt and pepper mill is intended
for peppercorns or coarse salt.

Proceed as follows:
1. Please hold the base with container

6

tightly

and turn the top

1

anticlockwise (see fig. A).

2. Now please pull the top

1

off the base with

container

6

(see fig. A).

3. Pull the motor

3

carefully off the base with

container

6

(see fig. A).

4. Pull the battery ring

7

off the motor

3

(see

Fig. A).

5. Insert 4 new batteries type AA 1.5 V

(LR06) (see fig. A).

Indication: Pay attention to the right polarity.
This is shown in the battery compartment.

6. Place the battery ring

7

back on to the motor

3

(see Fig. A).

7. Fill up the base with container

6

with pepper-

corns or coarse salt. The best result will be
achieved when filling the base with container

6

up to 75 %.

8. Put the motor

3

back on the base with contai-

ner

6

.

Indication: Please make sure that the con-
tacts

4

,

5

face each other (see fig. A).

9. Put the top

1

back on the base with container

6

.

Indication: Close the mill by turning the top

1

clockwise.

10. Please hold the base with container

6

tightly

and turn the top

1

clockwise (see fig. B).

Q

Using of the salt

and pepper mill

j

Please keep the button

2

pushed to activate

the salt and pepper mill. The bulb

9

on the

base of the salt and pepper mill will then be
simultaneously activated.

Advertising