EMC CLARiiON - Manual (Page 77)

Removing the Host Agent A-19
Silent Installations and Removals
Host Agent example:
RunDll32
C:\PROGRA~1\COMMON~1\INSTAL~1\engine\6\INTEL3
~1\ctor.dll,LaunchSetup "C:\Program Files\InstallShield
Installation
Information\{249CF790-30CE-11D4-9A87-0060B0FB53A4}\
Setup.exe" -STARTEDFROMADDREMOVEPROGRAMS -s
-f1E:\aSafeDir\agentUninst.iss
-f2C:\aLocalSafeDir\agentUninst.log
where -s specifies a silent operation will be performed, in this
case a removal, using the response file recorded in
E:\aSafeDir\agentUninst.iss.
It will then log the result in
C:\aLocalSafeDir\agentUninst.log .
3. Verify that the removal was successful (refer to the next section,
Verifying the silent installation or removal) before running the
command on all the other attached Windows servers.
4. If the removal was successful, repeat steps 1 and 2 on all
remaining attached Windows servers.