Eclipse - Fujitsu Ten AVX5000 - Manual (Page 160)

159
I
II
III
IV
V
VI
VII
VIII
IX
X
XI
XII
XIII
XIV
XV
XVI
XVII
XVIII
XIX
You can change the “Memory Stick Duo” and security code that have been recorded by the
unit to a different “Memory Stick Duo” and security code.
Cancel the security code that has been recorded with the deck.
● Refer to “How to cancel the “Memory Stick” security” on page 157.
Re-record the new “Memory Stick Duo” and security code that you would
like to use.
● Refer to “How to record a security code” on page 155.
If power is disconnected while ESN security is active (a security code was recorded),
operation is disabled until power is restored and the unit unlocked. Follow this procedure to
resume normal operation.
ESN security lock can be canceled by directly entering the security code into the unit, or by
using the “Memory Stick Duo” that was being used when the security code was recorded.
Canceling ESN security lock out using security code entry
When the power is turned on after disconnecting the battery power, a
“SECURITY” message will appear for 2 seconds. Thereafter, the security
code entry screen will appear.
A security code is entered by
touching switches.
● Enter a four-digit security code using
digits 0 to 9, A to F.
How to change the “Memory Stick Duo”
How to resume normal operation (ESN security lock out)