Eclipse - Fujitsu Ten AVX5000 - Manual (Page 202)

How to operate the optional 5.1ch decoder & AV selector unit
201
I
II
III
IV
V
VI
VII
VIII
IX
X
XI
XII
XIII
XIV
XV
XVI
XVII
XVIII
XIX
Setting display
Screen settings of the optional 5.1 ch decoder & AV
selector unit
Up to two external monitors can be connected when the 5.1 ch decoder & AV selector unit is
connected. Separate images can be displayed on each external monitor.
External monitor image settings
Select the image to be displayed on the external monitors.
Press and hold until you
hear a beep.
Touch .
Touch or
and select an image.
● Each time the switch is touched, the
image is changed in the following order
shown below.
● The selected image will appear on the
left side of the screen.
● Touch after making settings.
The picture setting mode adjustments
will be saved and system will return to
the previous operation screen.
FUNC
AV Setting
Monitor 1 Monitor 2
DVD VTR1 VTR2
BACK
If a VTR or DVD player is not connected to the 5.1 ch decoder & AV selector unit,
no image will be displayed.