Casio EX-s600 - Manual (Page 168)

OTHER SETTINGS
168
1.
Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera,
remove it (page 171).
2.
Press [MENU].
3.
Select the “Set Up” tab, select “Format”, and
then press [
왘].
4.
Use [
왖] and [왔] to select “Format”, and then
press [SET]. Entering the PLAY mode after
formatting built-in memory will cause the
message “There are no files.” to appear.
• To exit the format operation without formatting,
select “Cancel”.