Echo CS-510 - Manual (Page 24)

22
@ 406 (16) 160336601 162336601 8.26 (0.325) OREGON33SL 66
457 (18) 180337201 182337201 8.26 (0.325) OREGON33SL 72
508 (20) 200337801 202337801 8.26 (0.325) OREGON33SL 78
CHAIN AND GUIDE BAR COMBINATION
Guide Bar Saw chain
The following combinations are recommended to the model CS-510.
Side plate angle Top plate filing angle
60
°
25
°
60
°
Parallel
0.64 mm (0.025 in)
↓↓↓↓↓
↑↑↑↑↑ ↑↑↑↑↑
↓↓↓↓↓
SAW CHAIN
CAUTION
Do not use replacement saw chain unless it has
been designated as meeting the ANSI B 175.1-
2000 kickback performance requirements.
GUIDE BAR
Replacement guide bars.
The following guide bars may be considered to
have equivalent kickback energy.
•
Sprocket nose guide bars of the same length
and nose radius, same pitch and having the
same number of teeth.
•
A hard nose guide bars of the same length and
nose radius as a sprocket nose bar.
NOTE
LOW KICKBACK SAW CHAIN is the chain which
has met the kickback performance requirements
of ANSI B 175.1-2000. (safety requirements for
gasoline-powered chain saws)
Properly filed cutters are shown as illustration.
When setting of the chain is finished, soak it in oil
and wash away filings completely before using.
- When chain has been filed on the bar, supply
sufficient oil to it, rotate the chain slowly to wash
away the filings before using again.
- If the chain saw is operated with filings clogged
in the groove, the saw chain and the guide bar
will be damaged prematurely.
- If the saw chain becomes soiled with resin, for
instance, clean it with kerosene and soak in it oil.
NOTE
These angles are referred to as Oregon 33SL.
To sharpen other follow chain manufacturer’s
instruction.
Top plate cutting angle Depth gauge
Length ECHO Part No. Pitch Type Links
mm (in) Double Guard Intenz mm (in)
@ Standard configuration