Storage after use, Technical data – Echo CS-510 User Manual

Page 27

Advertising
background image

25

CS - 510

Dimension

L x W x H

mm

398 x252x 272 (15.7 in x 9.9 in x 10.7 in)

Masses

Power head, dry

kg

4.9 (10.8 lb)
Without chain and guide bar

Engine

Type

Air-cooled two-stroke single cylinder

Displacement

mL (cm³)

49.3 (3.00 cu in)

Carburettor

Diaphragm type

Magneto

Flywheel magneto : CDI system

Spark plug

CHAMPION CJ-6Y or NGK BPM 8Y

Starter

Recoil starter

Power transmission

Automatic centrifugal clutch

Fuel

Mixture ratio

50 : 1 ratio with ECHO brand two-stroke oil.
89 octane unleaded. Do not use fuel containing
methyl alcohol, more than 10% ethyl alcohol or 15%
MTBE.

Tank capacity

L

0.60 (20.3 US fl oz)

Oil

Bar and chain

ECHO bar and chain oil (or motor oil)

Tank capacity

L

0.28 (9.5 US fl oz)

Guide bar and

See page 22 for Chain and Guide Bar

saw chain

Combination

Lubrication

Adjustable automatic oil pump

Standard

Front hand guard, Rear hand guard

features

Anti-vibration, Spiked bumper
Throttle control lockout, Chain brake
Chain catcher, Spark arrestor muffler, Kick guard

STORAGE AFTER USE

* Technical data subject to change without notice.

TECHNICAL DATA

Inspect and adjust every part of the chain saw.
- Completely clean every part and repair if

necessary.

- Apply thin coating of oil on metal parts to

prevent rust.

Remove chain and guide bar, apply sufficient oil
coating and wrap them up in plastic sheet.

Drain fuel tank, pull starter slowly a few times to
drain fuel from carburettor.

Pour a small amount of clean motor oil into spark
plug hole, pull starter and crank the engine until
the TOP DEAD CENTER.

Store in a dry area, free from dust.

WARNING DANGER

DO NOT STORE IN ENCLOSURE WHERE
FUEL FUMES MAY ACCUMULATE OR
REACH AN OPEN FLAME OR SPARK.

NOTE

For future reference, you should keep this
instruction manual.

CAUTION

Do not lend and rent your chain saw without the
Instruction manual, Safety manual and Kick-
guard instruction.

Advertising