Electrolux EKM 70150 - Manual (Page 28)

28 electrolux
Mounting the splashback
The appliance is fitted with a metal
splashback which should be fitted
to the rear of the cooktop.
You will find the splashback
inserted on top of the polystyrene
packing.
Mount the splashback as follows:
1. Carefully clean the cooktop,
removing any residue of the protective
film and any traces of grease;
2. In a plastic bag you will find the
two chrome supports and fixing screws
to fasten the splashback;
3. Fasten the two supports at the
back of the cooktop using the two
screws,taking care not to obstruct the
air vents (Fig. a).
4. Remove the protective film from
the splashback;
5. Insert it into the supports as
indicated in Fig. b, locking it to the ends
with the four screws supplied.
Fig. a
Fig. b
Fig. c