Casio HS-50W - Manual (Page 2)

Operation Guide HS-50W
2
LAP/SPLIT TIMES
A maximum of 9 lap/split time records and total elapsed time are automatically stored into the memory, and
recalled by pressing the R button.
Once 9 lap/split time records are stored (counter shows a flashing value greater than 9), pressing C displays the
current lap/split time, but does not store it in memory.
0
a
(a)
b
(a + b)
c
(a + b + c) (t)
START
1ST LAP 2ND LAP 3RD LAP
1ST SPLIT (a)
2ND SPLIT (a+b)
3RD SPLIT (a+b+c)
STOP RESET
CHART
BUTTON
OPERATION
DISPLAY
Recording the Finishing Times of Multiple Runners
After pressing A to start timing, press C as each runner crosses the finish line. This records each of the finishing
times in memory, which you can recall by pressing the R button.
*Recorded times are retained in memory until you start a new net time operation (by pressing A) after clearing
the stopwatch screen to all zeros (by pressing C).
Example : To record the times of 10 different runners.
START 1ST RUNNER
FINISHES
2ND RUNNER
FINISHES
9TH RUNNER
FINISHES
10TH RUNNER
FINISHES
CHART
BUTTON
OPERATION
DISPLAY
Difference between this runner’s record
and the previous runner’s record
You can scroll through time records in memory by pressing , even while the stopwatch is
still running.
Press .
Runner’s finishing position
Runner’s record
SETTING TIME AND DATE
1) Press C for a few seconds in TIME display to set time and date.
2) Press A on a time signal to correct seconds.
3) Press C shift flashing digit (s). Digit(s) to be changed will flash.
SECONDS HOUR MINUTES YEAR
MONTH DAY DAY OF THE WEEK
4) Each press of A increments digit. Keep pressed to move quickly.
5) Press B or C to complete setting.
*Year digits can be set up to the year 2029.
AUTO-retrieve function
Display automatically returns to TIME if left unused for a few minutes.