Casio ClassPad 330 V.3.04 OS Update - Manual (Page 6)

E-5
20080301
1 Prepare the ClassPad OS Update data on your computer.
8
. Use the USB cable that comes with your ClassPad to connect to the computer.
Important!
• Never disconnect the USB cable unless specifically instructed to do so. Doing so can cause the calculator to
malfunction.
9
. What you should do next depends on what appears on your computer screen.
• If the Found New Hardware Wizard dialog box appears
This means your computer does not have the ClassPad USB driver installed. If this happens, perform
the procedure under “2. Install the ClassPad USB driver on your computer” on page E-6.
• If the ClassPad OS Update dialog box appears
Advance to the procedure under “3. Back up the data that is currently in the memory of your ClassPad”
on page E-7.
10
. Click [Next].
11
. Press the ClassPad
o
key to turn it on.
12
. Scroll down the application menu and
then tap
B
to start up the
Communication application.
13
. Tap
E
.
• If the Found New Hardware Wizard dialog box appears
This means your computer does not have the ClassPad USB driver installed. If this happens, perform
the procedure under “2. Install the ClassPad USB driver on your computer” on page E-6.
• If the ClassPad OS Update dialog box appears
Advance to the procedure under “3. Back up the data that is currently in the memory of your ClassPad”
on page E-7.
• If nothing happens, it means that the ClassPad’s “Cable Type” setting is something other than “USB
cable”. Use the procedure under “Configuring Communication Parameters” in the ClassPad 330 User’s
Guide to change the “Cable Type” setting to “USB cable”. Next, tap the ClassPad
E icon.