Electrolux EKM11440KN - Manual (Page 18)

Through your programmer you will be able to set the time
of day, set the minute minder, and use the semi and fully
automatic cooking functions. The programmer is vital to
the working of your appliance, and reading this section will
make sure that you get the most out of your ovens.
The programmer buttons
There are three buttons on this type of timer. The table
below shows you what their symbols look like, depending on
the model type, and what they do.
Setting the time of day
● Press the Plus and Minus buttons together for a few
seconds, and release.
● The ‘ ● ’ in between the numbers on the LED Display will
begin to flash.
● While the ‘ ● ’ is flashing it is possible to adjust the time
using the Plus and Minus buttons.
● Once the time has been set, allow approximately 30
seconds before using any of the other timer functions.
This ensures that the time will remain correct.
Setting an alarm tone
You can change the alarm tone if desired - there are 3
choices.
● Press and hold the minus button.
● Once the minus button is released, that tone is selected.
Symbol Symbol What is it?
-
Down / Minus
Used to decrease cook / end time, remove
minutes from the minute minder and adjust
the time of day.
Also for listening to and setting the alarm
tone.
+
Up / Plus
Used to increase cook / end time, add minutes
to the minute minder and adjust the time of
day.
Function button
Used to select the functions available on this
timer.
Press once for: Minute Minder.
Press twice for: Cook time
Press three times for: End time.
How to use these functions is explained later
on in this section.
Using The Programmer/Clock
A
Automatic
symbol Cook Pot
Minute Minder
symbol
A
This is a 24 hour clock.
Before you do anything
with your appliance -
you must set the correct
time of day. i
What your timer symbols
mean.
15