Casio PX-760 - Manual (Page 24)

EN-22
Recording and Play Back
After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.
1.
Press the RECORDER button twice so its
lamp is flashing.
• At this time the L lamp will flash to indicate that the
Digital Piano is standing by for recording to Track 1.
2.
To change the recording track, hold down the
FUNCTION button as you press the
RECORDER (L/R) button.
• Make sure that the indicator lamp for the record track
is flashing.
Track 1: L lamp
Track 2: R lamp
Example: Track 1 selected
3.
Select the tone and effects (Track 1 only) you
want to use in your recording.
• Tone (page EN-9)
• Effects (page EN-12)
NOTE
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings,
and then press the METRONOME button. See
“Using the Metronome” on page EN-14 for more
information.
4.
Start playing something on the keyboard.
• Recording will start automatically.
5.
To stop recording, press the START/STOP
a button.
• This will cause the RECORDER button lamp and the
lamp of the track you recorded to change from
flashing to lit.
• To play back the track you just recorded, press the
START/STOP a button.
6.
After you are finished recording or playing
back, press the
RECORDER button so its
lamp goes out.
To record to a specific track of
a song
PX760-ES-1A.indd 24 2014/06/24 10:35:14