Casio PX-860 - Manual (Page 53)

EN-52
Getting Ready
4.
Insert angle brackets H into the gap between
the anti-tipping bracket and the side panel.
5.
From the outside of side panels A and B ,
temporarily tighten the screws you loosened
in step 3, above.
6.
Mount pedal unit E onto angle brackets H ,
which you installed in step 5, above.
7.
Mount brackets L onto both ends of the
pedal unit E .
8.
Use the screws F to securely fix the brackets
L to the pedal unit E .
9.
After adjusting the position (height) of pedal
unit
E , fully tighten the screws that you
temporarily tightened in step 5, above.
10.
Secure the back board K to the back board
C .
• Screw the screws M into the four holes in the back
board K.
H
E
L
F
M 4 X
C
K
PX860-ES-1A.indd 54 2014/06/27 12:26:17