Casio QV-5700 2 - Manual (Page 12)

OTHER RECORDING FUNCTIONS
65
• The above approximate focusing distances indicate the
distance from surface of the lens protector to the subject.
1. Use the selector dial to select “ ” as the focus
mode.
2. Compose the image and record it.
• Focusing and image recording procedures are the
same as that for Spot AF (page 63).
• You can find out the status of the focus operation by
checking the color of the focus frame and the status of
the operation/card access lamp. See “Using Auto Fo-
cus (Multi-area Auto Focus)” on page 62 for more in-
formation.
Using the Infinity Mode
The Infinity Mode sets the focus near infinity. It is a good
choice for scenery and other far-off subjects. Focus adjust-
ment starts automatically whenever you press the shutter
release button about half way down.
1.
Use the selector dial to select “ ” as the focus
mode.
2.
Compose the image and record it.
• See “Using the Spot Auto Focus Mode” on page 63 for
information about how to focus and record an image.
• You can find out the status of the focus operation by
checking the color of the focus frame and the status of
the operation/card access lamp. See “Using Auto Fo-
cus (Multi-area Auto Focus)” on page 62 for more in-
formation.
Using the Macro Mode
The Macro Mode automatically sets the focus for close-up
shooting. Focus adjustment starts automatically whenever
you press the shutter release button about half way down.
The following shows the relationship between the optical
zoom factor and the focusing distance for the Macro Mode.
Optical Zoom Factor
1X
2X
3X
Approximate Focusing Distance
6cm to 50cm (2.4˝ to 19.7˝)
9cm to 50cm (3.5˝ to 19.7˝)
20cm to 50cm (7.9˝ to 19.7˝)