Emerson Radio PD3686 - Manual (Page 18)

1 7
Listening To The Radio
1.) Press the POWER button. The main display turns ‘On’.
2.) If necessary, press the FUNCTION button to select
the Tuner function. The display will show an AM
or FM station frequency.
To select a different band, press the STOP/
BAND button.
3.) Tune to the desired frequency as follows:
• Automatic Tuning
Press and hold the or button until the display begins to move, then
release the buttons. The tuner will search up or down the band for the next
strong station and stop on that station. Repeat this procedure until the tuner
stops on your desired station.
• Manual Tuning
Repeatedly press the or button until the frequency of the desired station
appears on the display. Use manual tuning to select weaker stations that cannot
be tuned automatically.
4.) If you tuned to an FM Stereo station, the
indicator will appear in the display.
If the reception is noisy or weak, press the INTRO/ST. button to select FM
Mono mode. The indicator will disappear. The reception will normally
improve although the sound will no longer be in stereo.
5.) Adjust the VOLUME, X-BASS and EQ controls as desired.
PD3686_021705r.p65 17/2/2005, 16:14 17