Emerson Radio PD3686 - Manual (Page 28)

2 7
7.) To begin programmed playback press the button.
The display will show the first programmed track
and playback will begin on that track. The
Indicator remains in the display.
After the last programmed track has played the player stops but the programmed
tracks remain in the memory. To play the programmed tracks again, press the
PRG. button and then the button.
To cancel the programmed sequence from memory, press the STOP/BAND button
at programming mode or open the CD door.
Program Repeat Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks.
First, program the desired tracks according to Steps 1 through 7 on page 26.
When Programmed Playback begins press the REPEAT button twice to activate
the All Tracks Repeat feature.
The Indicator appears in display and all the tracks s
in your programmed sequence will be repeated
continuously.
To cancel Programmed Repeat Playback press the STOP/BAND button until
both the and Indicators go ‘Off’.
PD3686_021705r.p65 17/2/2005, 16:14 27