Powerplus POW6471 CULTIVATOR 140CC EN - Manual (Page 8)

POW6471
EN
Copyright © 2012 VARO P a g e | 8 www.varo.com
When the clutch lever is squeezed, the clutch is engaged and power is transmitted. Squeeze
the lever, the tool will be rotated.
When the lever is released, the clutch is disengaged and power is not transmitted.
Release the clutch lever, the tool will be stopped.
8.5 Adjustment
8.5.1 Wheel adjustment
Pull out the wheel support, and turn to appropriate position.
For moving, turn the wheel to position A. (Fig. 15)
For working, turn the wheel to position B. (Fig. 16)
8.5.2 Depth adjustment
Draw out the B-shape lock and pin, adjust the resistance pole to an appropriate position, then
replace the pin and fix with B-shape lock. (Fig. 17)
8.5.3 Handlebar adjustment
Disentangle the fastening bolts on both sides, adjust the handlebar to a suitable position, then
tighten the bolts. (Fig. 18)
9 TECHNICAL DATA
Engine displacement 140cc
Weight 30,5kg
Max. rotational speed
3000 min
-1
Cutting width 400mm
Blade thickness 3,0mm
Motor Power 2.917kW @ 3000 min-1
Oil Tank Capacity 0.6l
Fuel tank capacity 0.9l
10 SOUND EMISSION
Noise emission values measured according to relevant standard.
LpA (Sound pressure level) :
72 dB(A) K = 3 dB(A)
LwA (Sound power level) : 93 dB(A) K = 3 dB(A)
ATTENTION! The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
aw (Vibration) : 6.5 m/s² K = 1.5 m/s²
11 MAINTENANCE AND STORAGE
11.1 Cultivator Maintenance
 The transmission case has grease installed at the factory. We recommend checking the
grease level every month. DO NOT overfill.
 Keep all screws, nuts, and bolts tight.
 For cold weather operation, store the unit in a cool environment. Transferring the unit from
a warm to a cold place can cause the build up of harmful condensation.