Power tool use and care, Service, Specific safety warnings – Powerplus POW6103 HEDGE TRIMMER 500W 466MM EN User Manual

Page 4: Pow6103, 6 specific safety warnings

Advertising
background image

POW6103

EN

Copyright © 2015 VARO

P a g e

| 4

www.varo.com

 Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.

 If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of these devices can reduce dust related
hazards.

5.4

Power tool use and care

 Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

 Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

 Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.

 Store idle power tools out of the reach of children and do not allow persons unfamiliar with

the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.

 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.

 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to stick and are easier to control.

 Use the power tool, accessories and tool bits etc., in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.

5.5

Service

 Have your power tool serviced by a qualified person using only identical replacement

parts. This will ensure that the safety of the power tool is maintained.

6 SPECIFIC SAFETY WARNINGS

 The Hedge Trimmer must not be used by anyone under the age of 16.
 Keep children, other people and pets away from the trimmer.

Always dress properly. Don’t wear loose clothing or jewelry; they can be caught in moving
parts. Use of rubber gloves and substantial footwear is recommended when working
outdoors. Wear protective hair covering to contain long hair.

 Use face or dust mask if operation is dusty.
 Do not use the trimmer if the cutting device is not secured properly or is damaged.
 Before starting the trimmer, make sure that the cutting blade is not touching stones or

debris.

 When the trimmer is in operation, keep the cutting section away from all parts of the body.
 Do not cut against hard objects. This could cause injury or damage the trimmer.
 Only cut during broad daylight or with corresponding artificial light.

Don’t abuse cord, never carry hedge trimmer by cord or yank it to disconnect from
receptacle. Keep cord from heat, oil, and sharp edges.

 When the trimmer is not in use, store it in a dry place so that the blade is not exposed and

out of the reach of children.

 The main voltage must correspond to the one marked on the technical data plate. Do not

use other sources of power.

Advertising