Cleaning and maintenance, Cleaning, Technical details – Powerplus POWX0073LI IMPACT SCREWDRIVER 18V LI-ION ONE FITS ALL EN User Manual
Page 8: Noise
POWX0073LI
EN
Copyright © 2013 VARO
P a g e
| 8
www.varo.com
9 CLEANING AND MAINTENANCE
9.1
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DETAILS
Model nr.
POWX0073LI
Rated voltage (direct current)
18V
Rotation speed
0-2300 min-1
Impact rate
0-3000 min-1
Charging time
+/-1 hour
Battery type
1500mAh Li-Ion
Charger rated voltage
230V
Charger frequency
50Hz
Socket type
¼”
Max. torque
80Nm
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
99 dB(A)
Acoustic power level LwA
110 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Max 18,2m/s²
K = 1,5 m/s²