Powerplus POWXG3006 GRASS TRIMMER 800W EN - Manual (Page 3)

POWXG3006/POWXG3007 EN
Copyright © 2010 VARO P a g e | 3 www.varo.com
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
In accordance with
essential safety standards
of applicable European
directives Class II - The machine is
double insulated, and
earthing wire is
unnecessary.
Denotes risk of personal
injury or damage to the
tool.
Keep hands and feet away
from sharp parts.
Read manual before use Wear gloves
Remove plug from the
mains immediately if the
cable is damaged or cut
Never operate the machine
in the rain or in damp or wet
conditions. Moisture is an
electrical shock hazard.
Keep bystanders away
Wear ear guards and
goggles
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) power tool.
5.1 Working area
 Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
 Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
 Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety
 Always check that the power supply corresponds to the voltage on the rating plate.
 Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce
the risk of a lethal electric shock.
 Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of a lethal electric shock if your body is earthed .
 Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will
increase the risk of a lethal electric shock.