Powerplus POWXG3006 GRASS TRIMMER 800W EN - Manual (Page 9)

POWXG3006/POWXG3007 EN
Copyright © 2010 VARO P a g e | 9 www.varo.com
10 REPLACEMENT OF THE CUTTING LINE CARTRIDGE
Your trimmer is supplied with a fully disposable cutting line cartridge which does away with
the troublesome rewinding of the cutting line.
A) Cap
B) Cap released latch
C) Spool holder
D) Spool
E) Eyelet
To replace an empty cutting line cartridge, press both of the cap release latches on the cap
and withdraw it out of the spool holder; Then remove the spool. Feed the two cutting lines
through the eyelets of the spool holder and put the spool into the box. Press the cap into the
spool holder and lock it into place with the cap release latches.
Take the sleeve out of the spool by using a tool,
such as screwdriver.
Feed one end of the line into one of the eyelets
on the spool, and melt the end of the line into a
burl to stop it from slipping out the hole. Use the
same method for the other end.
Rewind the line in the direction of the arrow, then
fix both of the lines into the slots to prevent them
from coming loose.