Empty the grass box, Hours of operation, Technical data – Powerplus POWXG6107T LAWNMOWER 1600W 420MM +GRASS TRIMMER EN User Manual

Page 10: Noise, Maintenance and storage, Powxg6107, 8 technical data, 9noise, 10 maintenance and storage

Advertising
background image

POWXG6107

EN

Copyright © 2014 VARO

P a g e

| 10

www.varo.com

7.4

Empty the grass box

To prevent the ejector opening / blade becoming clogged and unnecessary overloading of the
motor , empty the grass box once it is full.

7.5

Hours of operation

Observe your national and regional regulations for the protection against noise which specify
hours during which a lawn mower may be operated.

8 TECHNICAL DATA

Rated Voltage

220-240V

Rated frequency

50Hz

Rated Power

1600W

Rotation speed

3000min

-1

Cutting width

420mm

Weight

15kg

Collect box/ bag

45L

Cutting height

20-70mm

Material housing

Plastic

Grass box material

Hard plastic

Number of height positions

6

Adjustable handle height

Yes

Carbon brush motor

Yes

Diameter front wheel

160mm

Diameter rear wheel

220mm

9

NOISE

Noise emission values measured according to relevant standard. (K=3)

Acoustic pressure level LpA

82dB(A)

Acoustic power level LwA

96 dB(A)

ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).

aw (Vibration)

1.7m/s²

K = 1,5 m/s²

10 MAINTENANCE AND STORAGE

 Make sure all fasteners (screws, nuts, ect.) are always fully tightened so that you can work

safely with the mower.

 Check the grass box for wear and tear at regular intervals.
 Replace any worn or damaged parts.
 Regular care of your lawnmower will not only increase its service life but will also facilitate

the meticulous and easy mowing of your lawn. Clean the lawnmower with brushes or
cloths. Do not use any solvents or water to remove dirt. Always switch off the motor and
pull out the power plug before carrying out any maintenance and cleaning work.

 The part most susceptible to wear and tear in the machine is the blade. Check the

condition of the blade and its fastener at regular intervals. If the blade is worn, it must be
replaced or sharpened. If the mower vibrates excessively, this means that the blade is
either not balanced correctly or has been bent out of shape by knocks, in which case it
must be repaired or replaced.

Advertising