Operation, Cutting depth adjustment, Starting and stopping – Powerplus POWXG7512 LAWN SCARIFIER / AERATOR 1300W EN User Manual

Page 8: Starting, Stopping, Powxg7512, 8 operation

Advertising
background image

POWXG7512

EN

Copyright © 2015 VARO

P a g e

| 8

www.varo.com

8 OPERATION

8.1

Cutting depth adjustment

WARNING! Always switch the product off and pull the mains plug from
power supply before any adjustment.

 Adjust the depth according to the needs of your lawn. The most suitable depth depends on

the kind of lawn and the actual height of the grass.

 Push the depth adjustment lever (8) towards the wheel, then move it forward or backward

to adjust the cutting depth. (See Fig. 8a).

 Adjust the lever (8) to one out of the five stages. Read the adjusted depth from the scale.

(See Fig. 8b and table)

Scale/
position

Setting

Application

Depth

Scarifying

Depth

Raking

1

Transport

-10 mm

for transportation
and storage

-10 mm

for transportation
and storage

2

Minimal

+5 mm

scarifying a young
or sensitive lawn,
removing thin
thatch layers, also
use this setting
when scarifying a
second time in the
Autumn

+10 mm

raking a young or
sensitive lawn,
removing thin
thatch layers

3

Middle

0 mm

scarifying healthy
lawn, removing
thatch

+5 mm

raking healthy
lawn

4

Deep

-5 mm

scarifying healthy
lawn, removing
thicker thatch

0 mm

raking an
unkempt lawn

5

Maximal

-10 mm

scarifying an
unkempt lawn,
removing thick
thatch layers

-5 mm

do not use for
raking

8.2

Starting and stopping

8.2.1

Starting

The product is fitted with a lock-off button feature. To start the product, simply depress the
lock-off button (2) then fully press and hold the start/stop lever (1). The lock-off button can now
be released. (See Fig. 9)

NOTE: It is not necessary to maintain pressure on the lockoff button once
the start/stop lever is squeezed and the motor is running. The lock-off
button is a safety device to avoid accidental start-up of the device.

8.2.2

Stopping

The product will automatically stop once the start/stop level is released. The lock-off button will
have to be depressed and the start/stop lever squeezed to restart the product motor.

Advertising