Scarifying / aerating, Important notes, Cleaning and maintenance – Powerplus POWXG7512 LAWN SCARIFIER / AERATOR 1300W EN User Manual

Page 9

Advertising
background image

POWXG7512

EN

Copyright © 2015 VARO

P a g e

| 9

www.varo.com

9 SCARIFYING / AERATING

WARNING Risk of injury! Before beginning work, check the terrain and
remove all objects that may be flung out by the product.

WARNING Risk of injury! Never let go of the steering while working.

 Position the product on a flat grass surface.
 Keep the operating safety lock (2) pressed.
 Pull and keep hold of the operating lever (1); release the operating safety lock (2).
 Wait until the motor has reached the maximum idle speed.
 Steer the product at an even, slow speed (walking pace) in the straightest lines possible.
 Work in slight overlapping rows. The most effective pattern for scarifying/raking lawns is

straight lines along one of the sides. This will keep the rows even and ensures that all the
lawn is scarified/raked without missing any spots. (See Fig. 10).

 Circle around flower beds. When reaching a flower bed in the middle of the lawn, make a

row or two around the circumference of the bed.

 Pay special attention when changing direction.

9.1

Important notes

WARNING Risk of injury:

 Always keep the extension cable away from the product.
 Always work across slopes where possible.
 Never start the product on a consolidated surface.
 Release the operating lever (1) immediately if the scarifier roll (working roll) becomes

blocked by a foreign body.

 If a foreign body gets trapped, check the product and have it repaired if necessary.
 To improve results and maximise the service life of the product, the grass should be cut as

short as possible.

 Staying too long in one position can damage the grass swards.

10 CLEANING AND MAINTENANCE

WARNING! Risk of injury! Before any maintenance and/or cleaning work:

 Switch off the product.
 Pull out the mains plug.

WARNING! Risk of injury! Scarifier roll (working roll) runs on!

 Never tilt, lift or carry the product while the motor is running.
 Wait until the product has come to a standstill before commencing any maintenance

and/or cleaning work.

WARNING! Risk of injury! Perform only the maintenance work described
here yourself.

Advertising