Epson GT-15000 - Manual (Page 3)

EPSON GT-15000
12/03 EPSON GT-15000 - 3
IEEE 1394 FireWire
Interface type IEEE 1394-1995 compatible
Data transfer
method
Half-duplex Data/Strobe differential serial
Synchronization
method
Clock synchronization with DS-Link
Encoding/
decoding
DS-Link
Logic level 3.3 V
Compatible
connectors
IEEE 1394-1995 compatible
Power class Power class code 100
No power supply from external sources
Fitted with a repeat function with bus
power
ADF Connector
Interface type For use with the optional automatic
document feeder (B813212)
Output voltage 21.6 to 26.4 VDC (motor drive voltage)
4.75 to 5.25 VDC (sensor logic voltage)
Output current 0.6 A (24 V)
0.3 A (5 V)
Initialization Methods
SCSI interface
Hardware: Initialized when the scanner is turned on
or the scanner receives a SCSI Reset signal
from the SCSI interface
Software: Initialized when the software sends the
Esc @ (initialize the scanner command),
or the scanner receives a SCSI Bus Device
message
USB interface
Hardware: Initialized when the scanner is turned on
or the USB cable is plugged into the USB
port on the scanner
Software: Initialized when the software sends the
Esc @ command or the scanner receives a
Bus Reset from the USB interface
System Requirements
The minimum system requirements are listed below. For
optimum performance, a faster processor and more memory
are recommended. If you’re scanning high resolution images,
you need more than the minimum available hard disk space.
Note: Color and tone reproduction are subject to the display
capability of your computer system, including the video card, monitor,
and software. See the documentation for these products for details.
❏ A Microsoft Windows-compatible PC with a Pentium-
equivalent processor, 233 MHz or faster recommended
❏ Preinstalled Windows XP, 98, Me, or 2000 for USB
connection; Windows XP, 98, Me, 2000 Professional, or
Windows NT Workstation with Service Pack 4 or later for
SCSI connection
❏ SCSI, USB, or FireWire IEEE 1394 (Windows XP, Me, or
2000 only) port; FireWire card must be OHCI-compliant
❏ 64MB RAM (128MB RAM recommended for all systems)
❏ 300MB available hard disk space
❏ CD-ROM drive
❏ SVGA color monitor with 800 × 600 resolution
❏ 16-bit, 65K-color display adapter card (24-bit display
adapter card with millions of colors recommended)
Software Included
❏ EPSON Scan
❏ ABBYY FineReader 5.0 Sprint
❏ ScanSoft PaperPort Deluxe
❏ Adobe Photoshop Elements 2.0