eMachines Notebooks - Manual (Page 69)

71
troubleshooting
printer
Q My notebook is connected to a printer, but it’s not working. What should I
do?
A Try the following:
❂
Make sure that the printer power cable is plugged into a working
electrical outlet and that the printer is powered on.
❂
Check the cable connections between your notebook and the printer.
❂
Verify that you have the correct printer driver installed for your printer
model. For more information about installing the printer driver, refer to
the documentation that came with your printer or to Windows online
help.
error messages
Q I receive an “Out of Memory” or “Insufficient Memory” message. What’s
wrong?
A Your system resources are low, and all available memory is being used by
the open programs.
❂
Close one or more programs. If this doesn’t help, save the data you are
working on, close all programs, and restart your notebook. After
restarting, open only the programs that you need.
❂ Consider adding more physical memory to your notebook.
AACR53700001K4.book Page 71 Friday, September 5, 2003 1:52 PM